IKCEST

Abstract

The effect of direct fluorination on DC breakdown and flashover characteristics of epoxy/Al<inf>2</inf>O<inf>3</inf> nanocomposites was investigated. Pure epoxy resin and epoxy/Al<inf>2</inf>O<inf>3</inf> nanocomposites with 1, 3 and 5 wt% mass fractions were synthesized, and direct fluorination of the samples was carried out at 55 °C for 30 min using a F<inf>2</inf>/N<inf>2</inf> mixture with 20 vol% F<inf>2</inf> at 0.05 MPa. Fourier transform infrared spectroscopy and atomic force microscopy show that molecular chain scission occur during direct fluorination, which may significantly suppress surface charge accumulation while incorporating Al<inf>2</inf>O<inf>3</inf> nanoparticles into epoxy may restrict surface potential decay of fluorinated epoxy resin. The trap characteristics obtained by isothermal surface potential decay show that 1 wt. % sample has deeper traps and higher trap density. DC breakdown and flashover of samples were measured to evaluate the influence of nano filling and direct fluorination on electrical performance of epoxy resin. The results show that epoxy resin with higher DC breakdown and flashover strength can be obtained by simultaneous application of nano filling and direct fluorination. Compared to un-fluorinated epoxy resin, the DC breakdown and flashover voltage of fluorinated epoxy/Al<inf>2</inf>O<inf>3</inf> nanocomposites with mass fraction of 1 wt% improved 17 and 23%, respectively.

Original Text (This is the original text for your reference.)

DC breakdown and flashover characteristics of direct fluorinated epoxy/Al<inf>2</inf>O<inf>3</inf> nanocomposites

The effect of direct fluorination on DC breakdown and flashover characteristics of epoxy/Al<inf>2</inf>O<inf>3</inf> nanocomposites was investigated. Pure epoxy resin and epoxy/Al<inf>2</inf>O<inf>3</inf> nanocomposites with 1, 3 and 5 wt% mass fractions were synthesized, and direct fluorination of the samples was carried out at 55 °C for 30 min using a F<inf>2</inf>/N<inf>2</inf> mixture with 20 vol% F<inf>2</inf> at 0.05 MPa. Fourier transform infrared spectroscopy and atomic force microscopy show that molecular chain scission occur during direct fluorination, which may significantly suppress surface charge accumulation while incorporating Al<inf>2</inf>O<inf>3</inf> nanoparticles into epoxy may restrict surface potential decay of fluorinated epoxy resin. The trap characteristics obtained by isothermal surface potential decay show that 1 wt. % sample has deeper traps and higher trap density. DC breakdown and flashover of samples were measured to evaluate the influence of nano filling and direct fluorination on electrical performance of epoxy resin. The results show that epoxy resin with higher DC breakdown and flashover strength can be obtained by simultaneous application of nano filling and direct fluorination. Compared to un-fluorinated epoxy resin, the DC breakdown and flashover voltage of fluorinated epoxy/Al<inf>2</inf>O<inf>3</inf> nanocomposites with mass fraction of 1 wt% improved 17 and 23%, respectively.

+More

Keywords

nano filling electrical performance atomic force microscopy transform infrared spectroscopy fluorination surface potential decay of fluorinated epoxy surface charge accumulation trap characteristics epoxyalltinfgt2ltinfgtoltinfgt3ltinfgt dc breakdown and flashover characteristics molecular chain scission alltinfgt2ltinfgtoltinfgt3ltinfgt nanoparticles

Cite this article

APA

MLA

Chicago

Feipeng WangTao ZhangJian LiKhan Muhammad ZeeshanLi HeZhengyong HuangYushuang He,.DC breakdown and flashover characteristics of direct fluorinated epoxy/Al<inf>2</inf>O<inf>3</inf> nanocomposites. 26 (3),702-737.

Language

International

Translate engine

Article's language

Action

Recommended articles

Report