Experiments in Fluids | Vol.59, Issue.9 | | Pages
Stall cell formation over a post-stall airfoil: effects of active perturbations using plasma actuators
Stall cells have been observed over stalled airfoils by many researchers and there have been extensive discussions in the literature on their formation mechanism. They have been known to be unsteady and sensitive to even the smallest upstream perturbations, and therefore, can be made spatially steady by fixing the upstream perturbation location. In the current experimental work, flow with a Reynolds number of 5·105 over a stalled VR-7 airfoil with an aspect ratio 3 was perturbed using a single nanosecond dielectric barrier discharge (NS-DBD) plasma actuator positioned near the leading edge and covering the span of the airfoil. Surface oil flow visualization and stereo particle image velocimetry were employed to investigate spanwise non-uniformities on the airfoil surface as well as in the flow. The results show a gradual appearance of stall cells by increasing the perturbation Strouhal number to approximately 3 times the natural shedding Strouhal number of Stn = 0.6 (Ste ~ 3Stn). The stall cells become well-defined and eventually saturated with no further changes with increasing perturbation Strouhal number beyond 10Stn. The instability responsible for the stall cells is self-sustained as the stall cells persist after the perturbations are stopped. The results of the current work are discussed and interpreted using recent modal and non-modal linear global instability analyses, even though they are carried out in much lower Reynolds number laminar stalled flows over airfoils.
Original Text (This is the original text for your reference.)
Stall cell formation over a post-stall airfoil: effects of active perturbations using plasma actuators
Stall cells have been observed over stalled airfoils by many researchers and there have been extensive discussions in the literature on their formation mechanism. They have been known to be unsteady and sensitive to even the smallest upstream perturbations, and therefore, can be made spatially steady by fixing the upstream perturbation location. In the current experimental work, flow with a Reynolds number of 5·105 over a stalled VR-7 airfoil with an aspect ratio 3 was perturbed using a single nanosecond dielectric barrier discharge (NS-DBD) plasma actuator positioned near the leading edge and covering the span of the airfoil. Surface oil flow visualization and stereo particle image velocimetry were employed to investigate spanwise non-uniformities on the airfoil surface as well as in the flow. The results show a gradual appearance of stall cells by increasing the perturbation Strouhal number to approximately 3 times the natural shedding Strouhal number of Stn = 0.6 (Ste ~ 3Stn). The stall cells become well-defined and eventually saturated with no further changes with increasing perturbation Strouhal number beyond 10Stn. The instability responsible for the stall cells is self-sustained as the stall cells persist after the perturbations are stopped. The results of the current work are discussed and interpreted using recent modal and non-modal linear global instability analyses, even though they are carried out in much lower Reynolds number laminar stalled flows over airfoils.
+More
flow visualization spanwise nonuniformities nanosecond dielectric barrier discharge nsdbd plasma actuator modal and nonmodal linear global instability airfoil surface natural shedding strouhal number stereo particle image velocimetry classemphasistypeitalic eemsub nbsp3stsubem stall cells perturbations
Select your report category*
Reason*
New sign-in location:
Last sign-in location:
Last sign-in date: