Welcome to the IKCEST

IEEE Transactions on Power Electronics | Vol.33, Issue.9 | | Pages 7387-7397

IEEE Transactions on Power Electronics

Dual-Purpose Nonoverlapping Coil Sets as Metal Object and Vehicle Position Detections for Wireless Stationary EV Chargers

Seog Y. JeongHyung G. KwakGi C. JangSu Y. ChoiChun T. Rim  
Abstract

For commercialization of wireless stationary electric vehicles (EV) chargers, metal object detection (MOD) on a power supply coil and detection of position (DoP) of EVs are needed. In this paper, dual-purpose nonoverlapping coil sets for both MOD and DoP, which detect a variation of magnetic flux on the power supply coil, are newly proposed, where the proposed MOD and DoP methods make no contribution to any power losses. The existence of metal objects on the power supply coil is determined by an induced voltage difference of the nonoverlapping coil sets, whereas the position of the EV is determined by an induced voltage of the nonoverlapping coil sets. A sensing circuit, which has a variable resistor that is different from the conventional overlapping coil for MOD, can make the induced voltage difference zero even when the magnetic flux distribution is distorted by moving the pick-up coil. The proposed nonoverlapping coil sets with the sensing circuit have been demonstrated by simulations and experiments. When metallic coins and aluminum sheets are located on the power supply coil, the induced voltage difference of the coil sets, which is ideally zero without metal objects, significantly increases to 62.8 and 450 mV, respectively, which is more than ten times the value without metal objects throughout experiments. In addition, when the pick-up coil approaches the power supply coil, induced voltage of each coil set increased roughly 1.6 times at 10 cm air gap.

Original Text (This is the original text for your reference.)

Dual-Purpose Nonoverlapping Coil Sets as Metal Object and Vehicle Position Detections for Wireless Stationary EV Chargers

For commercialization of wireless stationary electric vehicles (EV) chargers, metal object detection (MOD) on a power supply coil and detection of position (DoP) of EVs are needed. In this paper, dual-purpose nonoverlapping coil sets for both MOD and DoP, which detect a variation of magnetic flux on the power supply coil, are newly proposed, where the proposed MOD and DoP methods make no contribution to any power losses. The existence of metal objects on the power supply coil is determined by an induced voltage difference of the nonoverlapping coil sets, whereas the position of the EV is determined by an induced voltage of the nonoverlapping coil sets. A sensing circuit, which has a variable resistor that is different from the conventional overlapping coil for MOD, can make the induced voltage difference zero even when the magnetic flux distribution is distorted by moving the pick-up coil. The proposed nonoverlapping coil sets with the sensing circuit have been demonstrated by simulations and experiments. When metallic coins and aluminum sheets are located on the power supply coil, the induced voltage difference of the coil sets, which is ideally zero without metal objects, significantly increases to 62.8 and 450 mV, respectively, which is more than ten times the value without metal objects throughout experiments. In addition, when the pick-up coil approaches the power supply coil, induced voltage of each coil set increased roughly 1.6 times at 10 cm air gap.

+More

Cite this article
APA

APA

MLA

Chicago

Seog Y. JeongHyung G. KwakGi C. JangSu Y. ChoiChun T. Rim,.Dual-Purpose Nonoverlapping Coil Sets as Metal Object and Vehicle Position Detections for Wireless Stationary EV Chargers. 33 (9),7387-7397.

Disclaimer: The translated content is provided by third-party translation service providers, and IKCEST shall not assume any responsibility for the accuracy and legality of the content.
Translate engine
Article's language
English
中文
Pусск
Français
Español
العربية
Português
Kikongo
Dutch
kiswahili
هَوُسَ
IsiZulu
Action
Recommended articles

Report

Select your report category*



Reason*



By pressing send, your feedback will be used to improve IKCEST. Your privacy will be protected.

Submit
Cancel