Welcome to the IKCEST

Flow, Turbulence and Combustion | Vol.97, Issue.2 | | Pages 427–449

Flow, Turbulence and Combustion

A Collaboration-based Approach to CFD Model Validation and Uncertainty Quantification (VUQ) Using Data from a Laminar Helium Plume

Kerry E. Kelly   Eric G. Eddings   Axel Schönbucher   Pál Tóth   Terry A. Ring   Laurie Centauri   Jeremy N. Thornock   Philip J. Smith   Weston M. Eldredge  
Abstract

An effective approach to the model VUQ process by means of direct collaboration between computationalist and experimental data analyst is proposed. An analysis of data from a laminar helium plume experiment provides a demonstration of the proposed collaboration process. Consistency analysis serves a central role in the collaboration. It takes the data and uncertainties from both analyst and computationalist and provides an objective and quantifiable measure of agreement between the two. Despite the simplicity of the laminar helium system and the computational model, certain phenomena brought to light in the collaboration process make it difficult to find quantitative agreement in the data. These phenomena include the unsteady behavior of air flow in an open room, and the presence of helium permeation to the region near the plume. Important sources of error in the simulation include uncertainty in the room temperature (295.15 to 305.15 K), uncertainty in the helium inlet velocity (0.1215 \(\frac {m}{s}\) to 0.1415 \(\frac {m}{s}\)), and uncertainty in local helium permeation (0 % to 3 % by mass.) The collaboration process allows for a better understanding of the phenomena affecting the plume and the relative sensitivies of the system to these phenomena.

Original Text (This is the original text for your reference.)

A Collaboration-based Approach to CFD Model Validation and Uncertainty Quantification (VUQ) Using Data from a Laminar Helium Plume

An effective approach to the model VUQ process by means of direct collaboration between computationalist and experimental data analyst is proposed. An analysis of data from a laminar helium plume experiment provides a demonstration of the proposed collaboration process. Consistency analysis serves a central role in the collaboration. It takes the data and uncertainties from both analyst and computationalist and provides an objective and quantifiable measure of agreement between the two. Despite the simplicity of the laminar helium system and the computational model, certain phenomena brought to light in the collaboration process make it difficult to find quantitative agreement in the data. These phenomena include the unsteady behavior of air flow in an open room, and the presence of helium permeation to the region near the plume. Important sources of error in the simulation include uncertainty in the room temperature (295.15 to 305.15 K), uncertainty in the helium inlet velocity (0.1215 \(\frac {m}{s}\) to 0.1415 \(\frac {m}{s}\)), and uncertainty in local helium permeation (0 % to 3 % by mass.) The collaboration process allows for a better understanding of the phenomena affecting the plume and the relative sensitivies of the system to these phenomena.

+More

Cite this article
APA

APA

MLA

Chicago

Kerry E. Kelly,Eric G. Eddings,Axel Schönbucher,Pál Tóth,Terry A. Ring,Laurie Centauri,Jeremy N. Thornock,Philip J. Smith,Weston M. Eldredge,.A Collaboration-based Approach to CFD Model Validation and Uncertainty Quantification (VUQ) Using Data from a Laminar Helium Plume. 97 (2),427–449.

Disclaimer: The translated content is provided by third-party translation service providers, and IKCEST shall not assume any responsibility for the accuracy and legality of the content.
Translate engine
Article's language
English
中文
Pусск
Français
Español
العربية
Português
Kikongo
Dutch
kiswahili
هَوُسَ
IsiZulu
Action
Recommended articles

Report

Select your report category*



Reason*



By pressing send, your feedback will be used to improve IKCEST. Your privacy will be protected.

Submit
Cancel