Abstract

In this research, conventional extrusion and twist extrusion are combined to propose a new design for single-pass severe plastic deformation technique, whi

+More

Keywords

singlepass severe plastic deformation technique whi conventional extrusion

Cite this article

M. Shahbaz,H. Ataei,H. S. Kim,N. Pardis,.Finite Element Analysis of Severe Plastic Deformation by Rectangular Vortex Extrusion. (),1-7.

M. Shahbaz, et al."Finite Element Analysis of Severe Plastic Deformation by Rectangular Vortex Extrusion"

M. Shahbaz,H. Ataei,H. S. Kim,N. Pardis,"Finite Element Analysis of Severe Plastic Deformation by Rectangular Vortex Extrusion"

References

J.G. Kim, M.I. Latypov, N. Pardis, Y. Beygelzimer, H.S. Kim, Mater. Des. 83, 858 (2015)

CATIA v5R21, Dassault Systems Corporation

R.Z. Valiev, T.G. Langdon, Prog. Mater Sci. 51, 881 (2006)

Y. Beygelzimer, R. Kulagin, M.I. Latypov, V. Varyukhin, H.S. Kim, Met. Mater. Int. 21, 734 (2015)

N. Pardis, R. Ebrahimi, Mater. Sci. Eng., A 527, 355 (2009)

M. Nouri, H. Mohammadian Semnani, E. Emadoddin, H.S. Kim, Measurement. 127, 115 (2018)

N. Pardis, C. Chen, M. Shahbaz, R. Ebrahimi, L.S. Toth, Mater. Sci. Eng., A 613, 357 (2014)

Y.Z. Li, X.F. Du, Appl. Mech. Mater. 291–294, 2676 (2013)

X. Ma, M.R. Barnett, Y.H. Kim, Int. J. Mech. Sci. 46, 449 (2004)

I. Khoubrou, B. Nami, S.M. Miresmaeili, Met. Mater. Int. 26, 196 (2020)

X. Ma, M.R. Barnett, Y.H. Kim, Int. J. Mech. Sci. 46, 465 (2004)

M. Shahbaz, N. Pardis, J.G. Kim, R. Ebrahimi, H.S. Kim, Mater. Sci. Eng., A 674, 472 (2016)

S. Khoddama, A. Farhoumand, P.D. Hodgson, Mater. Sci. Eng., A 550, 167 (2012)

M. Shahbaz, J.G. Kim, R. Ebrahimi, H.S. Kim, IJMF 4, 52 (2017)

N. Pardis, R. Ebrahimi, Mater. Sci. Eng., A 527, 6153 (2010)

M.I. Latypov, I.V. Alexandrov, Y.E. Beygelzimer, S. Lee, H.S. Kim, Comput. Mater. Sci. 60, 194 (2012)

S. Khoddam, A. Farhoumand, P.D. Hodgson, Mater. Sci. Eng., A 528, 1023 (2011)

Yu. Ivanisenko, R. Kulagin, V. Fedorov, A. Mazilkin, T. Scherer, B. Baretzky, H. Hahn, Mater. Sci. Eng., A 664, 247 (2016)

A.P. Zhilyaev, T.G. Langdon, Prog. Mater Sci. 53, 893 (2008)

E. Bagherpour, N. Pardis, M. Reihanian, R. Ebrahimi, Int. J. Adv. Manuf. Technol. 100, 1647 (2019)

W.F. Hosford, R.M. Caddel, Metal Forming, Mechanic and Metallurgy, 3rd edn. (Cambridge University Press, Cambridge, 2007)

N.Q. Chinh, G. Horvath, Z. Horita, T.G. Langdon, Acta Mater. 52, 3555 (2004)

S.M. Alavizadeh, K. Abrinia, A. Parvizi, Met. Mater. Int. 26, 260 (2020)

DEFORM-3D V11, Scientific Forming Technologies Corporation (SFTC)

N. Pardis, C. Chen, R. Ebrahimi, L.S. Toth, C.F. Gu, B. Beausir, L. Kommel, Mater. Sci. Eng., A 628, 423 (2015)

J. Joudaki, M. Safari, S.M. Alhosseini, Met. Mater. Int. 25, 1593 (2019)

Y. Estrin, A. Vinogradov, Acta Mater. 61, 782 (2013)

N. Pardis, B. Talebanpour, R. Ebrahimi, S. Zomorodian, Mater. Sci. Eng., A 528, 7537 (2011)

G. Faraji, H.S. Kim, Mater. Sci. Technol. 33, 905 (2017)

M. Shahbaz, R. Ebrahimi, H.S. Kim, Appl. Math. Model. 40, 3550 (2015)

M. Shahbaz, N. Pardis, R. Ebrahimi, B. Talebanpour, Mater. Sci. Eng., A 530, 469 (2011)

M. Eskandarzade, A. Masoumi, G. Faraji, M. Mohammadpour, X.S. Yan, J. Alloy. Compd. 695, 1539 (2017)

G. Ranjbari, A. Doniavi, M. Shahbaz, Met. Mater. Int. (2020). https://doi.org/10.1007/s12540-020-00635-7. (in print)

Y. Beygelzimer, V. Varyukhin, S. Synkov, D. Orlov, Mater. Sci. Eng., A 503, 14 (2009)

S.H. Molaei, M. Shahbaz, R. Ebrahimi, IJMF 1, 14 (2014)

M. Zabihi, E. Emadoddin, F. Qods, Met. Mater. Int. 26, 1 (2020)