Abstract

This paper presents an electrical performance design method of mechatronic circuit breakers (CB) based on multi-domain sequential coupling (MSC). Firstly,

+More

Keywords

electrical performance design method multidomain sequential coupling msc firstly mechatronic circuit breakers cb

Cite this article

Shuyou Zhang,Qianyong Chen,Jianrong Tan,Jinghua Xu,.Electrical Performance Design for Circuit Breakers Based on Multi-domain Sequential Coupling. 101 (2),139-152.

Shuyou Zhang, et al."Electrical Performance Design for Circuit Breakers Based on Multi-domain Sequential Coupling" 101

Shuyou Zhang,Qianyong Chen,Jianrong Tan,Jinghua Xu,"Electrical Performance Design for Circuit Breakers Based on Multi-domain Sequential Coupling"

References

M. Mitolo, H.J. Liu, Touch voltage analysis in low-voltage power systems studies. IEEE. Trans. Ind. Appl. 52, 556–559 (2016)

Q. Ma, M.Z. Rong, A.B. Murphy, Y. Wu, T.J. Xu, Simulation study of the influence of wall ablation on arc behavior in a low-voltage circuit breaker. IEEE Trans. Plasma Sci. 37, 261–269 (2009)

G. Escrivá-Escrivá, P.C. Roldán, E.C.W. de Jong, Nuisance tripping of residual current circuit breakers in circuits supplying electronic loads. Electr. Power Syst. Res. 131, 139–146 (2016)

J.H. Xu, S.Y. Zhang, Z. Zhao, X.X. Lin, Metamorphic manipulating mechanism design for MCCB using index reduced iteration. Chin. J. Mech. Eng. 26, 232–241 (2013)

J.A. Martinez-Velasco, J. Magnusson, Parametric analysis of the hybrid HVDC circuit breaker. Int. J. Electric. Power 84, 284–295 (2017)

I. Alsyouf, A. Al-Alami, A. Saidam, Implementing product design development methodology for assessing and improving the performance of products. Int. J. Interact. Des. Manuf. 9, 225–234 (2015)

IEC 60947-2, Low-voltage switch gear and control gear—part 2: circuit-breakers. Geneva, Switzerland: IEC (2013)

R.G. Ma, M. Rong, F. Yang, Y. Wu, H. Sun, D.L. Yuan, H.Y. Wang, C.P. Niu, Investigation on arc behavior during arc motion in air DC circuit breaker. IEEE Trans. Plasma Sci. 41, 2551–2560 (2013)

B. Roodenburg, B.H. Evenblij, Design of a fast linear drive for (hybrid) circuit breakers–development and validation of a multi domain simulation environment. Mechatronics 18, 159–171 (2008)

K. Ludwinek, J. Szczepanik, M. Sułowicz, Experimental analysis of assessing of the tripping effectiveness of miniature circuit breakers in an electrical installation fed from a synchronous generator set. Electr. Power Syst. Res. 42, 341–350 (2017)

V. Biagini, P. Bolognesi, G. Mechler, in Multi-domain mechatronic approach for the design of a vacuum contactor actuation drive. 22nd International Conference on Electrical Machines (ICEM), Lausanne, Switzerland (2016), pp. 1126–1131

N. Lin, V. Dinavahi, Electrothermal transient behavioral modeling of thyristor-based ultrafast mechatronic circuit breaker for real-time DC grid emulation. IEEE Trans. Ind. Electron. 67(3), 1660–1670 (2020)

H.P. Yu, C.F. Li, J.H. Deng, Sequential coupling simulation for electromagnetic–mechanical tube compression by finite element analysis. J. Mater. Process. Technol. 209, 707–713 (2009)

J. Andrea, P. Besdel, O. Zirn, The electric arc as a circuit component, in 41st Annual Conference of the IEEE-Industrial-Electronics-Society (IECON). Yokohama, Nov 09–12 (2015), pp. 3027–3034

J.H. Xu, S.Y. Zhang, J.R. Tan, H.S. Sheng, Interruption performance design of variable freedom mechanism triggered by electro-mechanical-magnetic coupling. Proc. Inst. Mech. Eng. Part C J. Mech. Eng. 231, 3330–3341 (2017)

J.H. Xu, T.T. Wang, S.Y. Zhang, J.R. Tan, Energy-efficient enhancement for viscoelastic injection rheomolding using hierarchy orthogonal optimization. Math. Prob. Eng. 2018, 1–20 (2018)

H.K. Kim, J.K. Chong, S.H. Lee, Analysis and design of short line fault interruption performance for self-blast gas circuit breakers. J. Electr. Eng. Technol. 9, 254–258 (2014)

C. Niu, J. Ding, Y. Wu, F. Yang, D. Dong, X. Fan, M. Rong, Simulation and experimental analysis of arc motion characteristics in air circuit breaker. Plasma Sci. Technol. 18, 241–246 (2016)

T. Matsumura, S. Hirata, E. Calixte, Y. Yokomizu, Current interruption capability of H2-air hybrid model circuit breaker. Vacuum 73, 481–486 (2004)

D. Parmar, M. Gojiya, Analysis and improvement in repulsive force of 630A frame moulded case circuit breaker (MCCB). Perspect. Sci. 8, 424–427 (2016)

R.R. El Khoury, M. Errera, K. El Khoury, M. Nemer, Efficiency of coupling schemes for the treatment of steady state fluid-structure thermal interactions. Int. J. Therm. Sci. 115, 225–235 (2017)

Y. Kawase, H. Mori, S. Ito, 3-D finite element analysis of electrodynamic repulsion forces in stationary electric contacts taking into account asymmetric shape. IEEE. Trans. Magn. 33, 1994–1999 (1997)

A.M. Shah, B.R. Bhalja, A laboratory prototype and simulation of ground constant measurement of circuit breaker. J. Inst. Eng. (India) Ser. B 96(1), 9–16 (2015)

J.H. Xu, S.Y. Zhang, J.R. Tan, Z. Zhao, Multi-actuated mechanism design considering structure flexibility using correlated performance reinforcing. J. Zhejiang Univ. Sci. A 16, 864–873 (2015)

Y. Wu, M.Z. Rong, Z.Q. Sun, X.H. Wang, F. Yang, X.W. Li, Numerical analysis of arc plasma behaviour during contact opening process in low-voltage switching device. J. Phys. D Appl. Phys. 40, 795–802 (2007)

P. Ludowski, T. Wulf, A. Roumpies, The pole connector for miniature circuit breakers used in photovoltaic applications. Appl. Therm. Eng. 99, 1057–1070 (2016)

L. Piqueras, D. Henry, D. Jeandel, J. Scott, J. Wild, Three-dimensional modelling of electric-arc development in a low-voltage circuit-breaker. Int. J. Heat Mass Trans. 51, 4973–4984 (2008)

J. Xu, X. Chen, S. Zhang, Q. Chen, H. Gou, J. Tan, Thermal design of large plate-fin heat exchanger for cryogenic air separation unit based on multiple dynamic equilibriums. Appl. Therm. Eng. 113, 774–790 (2017)