Abstract

CNC milling is a highly complex machining process highly valued in various industries, including the automotive and aerospace industries. With the increasi

+More

Keywords

industries milling machining process CNC increasi

Cite this article

Joon Huang Chuah,Shi Yuen Wong,Hwa Jen Yap,.Technical data-driven tool condition monitoring challenges for CNC milling: a review. (),1-21.

Joon Huang Chuah,Shi Yuen Wong,Hwa Jen Yap,"Technical data-driven tool condition monitoring challenges for CNC milling: a review"

Joon Huang Chuah,Shi Yuen Wong,Hwa Jen Yap,"Technical data-driven tool condition monitoring challenges for CNC milling: a review"

References

Cuka B, Kim DW (2017) Fuzzy logic based tool condition monitoring for end-milling. Robot Comput Integr Manuf 47:22–36

PHM Society 2010 2010 phm society conference data challenge. [Online] . [Cited: March 31, 2020.] http://www.phmsociety.org/competition/phm/10. Accessed 20 Jan 2020

Ghosh S, Naskar SK, Mandal NK (2018) Estimation of residual life of a cutting tool used in a machining process. In: 4th International Conference on Engineering, Applied Sciences and Technology. EDP Sciences, Phuket, Thailand

Khelif R et al (2017) Direct remaining useful life estimation based on support vector regression. IEEE Trans Ind Electron 64:2276–2285

Yun U et al (2018) Damped window based high average utility pattern mining over data streams. Knowl-Based Syst 144:188–205

Marinescu I, Axinte DA (2008) A critical analysis of effectiveness of acoustic emission signals to detect tool and workpiece malfunctions in milling operations. Int J Mach Tools Manuf 48:1148–1160

Zhu KP, Zhang Y (2019) A generic tool wear model and its application to force modeling and wear monitoring in high speed milling. Mech Syst Signal Process 115:147–161

Jain AK, Lad BK (2019) A novel integrated tool condition monitoring system. J Intell Manuf 30:1423–1436

Miao Q et al (2013) Remaining useful life prediction of lithium-ion battery with unscented particle filter technique. Microelectron Reliab 53:805–810

Duro JA et al (2016) Multi-sensor data fusion framework for CNC machining monitoring. Mech Syst Signal Process 66–67:505–520

Huang Z, Zhu J, Lei J et al (2020) Tool wear predicting based on multi-domain feature fusion by deep convolutional neural network in milling operations. J Intell Manuf 31:953–966. https://doi.org/10.1007/s10845-019-01488-7

Putz M et al (2017) State-based and Self-adapting Algorithm for Condition Monitoring. Procedia CIRP 62:311–316

Zhou JH et al (2011) Tool wear monitoring using acoustic emissions by dominant-feature identification. IEEE Trans Instrum Meas 60:547–559

Noordzij M, et al (2013) When do we need competing risks methods for survival analysis in nephrology? Nephrol Dial Transpl 28(11):8

Goyal D, Pabla BS (2015) Condition based maintenance of machine tools—a review. CIRP J Manuf Sci Technol 10:24–35

Antić A et al (2018) Novel texture-based descriptors for tool wear condition monitoring. Mech Syst Signal Process 98:1–15

Huang GB et al (2015) Local receptive fields based extreme learning machine. IEEE Comput Intell Mag 10:18–29

Wang JJ et al (2016) A new probabilistic kernel factor analysis for multisensory data fusion: application to tool condition monitoring. IEEE Trans Instrum Meas 65:2527–2537

Dutta S et al (2013) Application of digital image processing in tool condition monitoring: a review. CIRP J Manuf Sci Technol 6:212–232

Wang T, Qiao M, Zhang M et al (2018) Data-driven prognostic method based on self-supervised learning approaches for fault detection. J Intell Manuf. https://doi.org/10.1007/s10845-018-1431-x

Hill JL et al (2018) CNC Spindle Signal Investigation for the Prediction of Cutting Tool Health. In: Fourth European Conference of the PHM Society. Prognostics and Health Management Society, Utrecht, The Netherlands

Zhang C, Zhang JL (2013) On-line tool wear measurement for ball-end milling cutter based on machine vision. Comput Ind 64:708–719

Aliustaoglu C, Ertunc HM, Ocak H (2009) Tool wear condition monitoring using a sensor fusion model based on fuzzy inference system. Mech Syst Signal Process 23:539–546

Wojciechowski S (2011) Machined Surface Roughness Including Cutter Displacements in Milling of Hardened Steel. Metrol Meas Syst 18

Zhong WW, Zhao DB, Wang X (2010) A comparative study on dry milling and little quantity lubricant milling based on vibration signals. Int J Mach Tools Manuf 50:1057–1064

Mehta P, Werner A, Mears L (2015) Condition based maintenance-systems integration and intelligence using Bayesian classification and sensor fusion. J Intell Manuf 26:331–346

Wojciechowski S et al (2016) Investigation on the edge forces in ball end milling of inclined surfaces. Int J Mech Sci 119:360–369

Siddhpura A, Paurobally R (2013) A review of flank wear prediction methods for tool condition monitoring in a turning process. Int J Adv Manuf Technol 65:371–393

Cao WP et al (2018) A review on neural networks with random weights. Neurocomputing 275:278–287

Igelnik B, Yoh-Han P (1995) Stochastic choice of basis functions in adaptive function approximation and the functional-link net. IEEE Transactions on Neural Networks, 6(6): 1320–1329. https://doi.org/10.1109/72.471375

Zhu KP, Wong YS, Hong GS (2009) Wavelet analysis of sensor signals for tool condition monitoring: A review and some new results. Int J Mach Tools Manuf 49:537–553

Girardin F, Rémond D, Rigal JF (2010) Tool wear detection in milling—an original approach with a non-dedicated sensor. Mech Syst Signal Process 24:1907–1920

Dadgari A, Huo DH, Swailes D (2018) Investigation on tool wear and tool life prediction in micro-milling of Ti-6Al-4V. Nanotechnol Precis Eng 1:218–225

Wang JJ et al (2017) Multisensory fusion based virtual tool wear sensing for ubiquitous manufacturing. Robot Comput Integr Manuf 45:47–58

Liao WZ, Pan ES, Xi LF (2010) Preventive maintenance scheduling for repairable system with deterioration. J Intell Manuf 21:875–884

Zhang CJ et al (2016) Tool condition monitoring and remaining useful life prognostic based on a wireless sensor in dry milling operations. Sensors 16(6): 20

Widodo A, Yang B (2011) Machine health prognostics using survival probability and support vector machine. Expert Syst Appl 38:8430–8437

Song SL, Coit DW, Feng QM (2014) Reliability analysis for multi-component systems subject to multiple dependent competing failure processes. IEEE Trans Reliab 63:331–345

Liu P, Xu JH, Fu YC (2011) Cutting force and its frequency spectrum characteristics in high speed milling of titanium alloy with a polycrystalline diamond tool. J Zhejiang Univ (Sci A) 12:56–62

Zhang C et al (2011) A new tool wear estimation method based on shape mapping in the milling process. Int J Adv Manuf Technol 53:121–130

Tobon-Mejia DA, Medjaher K, Zerhouni N (2012) CNC machine tool's wear diagnostic and prognostic by using dynamic Bayesian networks. Mech Syst Signal Process 28:167–182

Liu SJ et al (2017) Machinery condition prediction based on wavelet and support vector machine. J Intell Manuf 28:1045–1055

Patra K, Pal SK, Bhattacharyya K (2013) Strategies for intelligent drill wear prediction using multiple sensor signals. Int J Mechatron Manuf Syst 6:493–512

Pereira A et al (2014) Topographic Wear Monitoring of the Interface Tool/Workpiece in Milling AISI H13 Steel. Adv Mater Res 966-967:152–167

Liao W, Li D, Cui S (2016) A heuristic optimization algorithm for HMM based on SA and EM in machinery diagnosis. J Intell Manuf p. 13

Buswell RA, Wright J (2004) Uncertainty in model-based condition monitoring. Build Serv Eng 25:65–75

Zhou ZL, Jiang PY (2017) Variation source identification for deep hole boring process of cutting-hard workpiece based on multi-source information fusion using evidence theory. J Intell Manuf 28:255–270

Pal S et al (2011) Tool wear monitoring and selection of optimum cutting conditions with progressive tool wear effect and input uncertainties. J Intell Manuf 22:491–504

Quintana G, Garcia-Romeu ML, Ciurana J (2011) Surface roughness monitoring application based on artificial neural networks for ball-end milling operations. J Intell Manuf 22:607–617

Dai YQ, Zhu KP (2018) A machine vision system for micro-milling tool condition monitoring. Precis Eng 52:183–191

Kostyukov VN, Kostyukov AV (2015) Real-time condition monitoring of machinery malfunctions. Procedia Eng 113:316–323

Rehorn AG, Jiang J, Orban PE (2005) State-of-the-art methods and results in tool condition monitoring: a review. Int J Adv Manuf Technol 26:693–710

Wang GF, Guo ZW, Qian L (2014) Online incremental learning for tool condition classification using modified Fuzzy ARTMAP network. J Intell Manuf 25:1403–1411

Yang Z, Djurdjanovic D, Ni J (2008) Maintenance scheduling in manufacturing systems based on predicted machine degradation. J Intell Manuf 19:87–98

Elgargni MA, Al-Habaibeh A (2015) Analytical and comparative study of using a CNC machine spindle motor power and infrared technology for the design of a cutting tool condition monitoring system. In: 2015 IEEE 13th International Conference on Industrial Informatics (INDIN)

Salimiasl A, Özdemir A (2016) Analyzing the performance of artificial neural network (ANN)-, fuzzy logic (FL)-, and least square (LS)-based models for online tool condition monitoring. Int J Adv Manuf Technol 87:1145–1158

Bhattacharyya P, Sengupta D, Mukhopadhyay S (2007) Cutting force-based real-time estimation of tool wear in face milling using a combination of signal processing techniques. Mech Syst Signal Process 21:2665–2683

Tseng TLB, Kwon YJJ (2014) Characterization of machining quality attributes based on spindle probe, coordinate measuring machine, and surface roughness data. J Comput Des Eng 1:128–139

Zhang ZY, Wang Y, Wang KS (2013) Fault diagnosis and prognosis using wavelet packet decomposition, Fourier transform and artificial neural network. J Intell Manuf 24:1213–1227

Bhuiyan MSH et al (2016) Application of acoustic emission sensor to investigate the frequency of tool wear and plastic deformation in tool condition monitoring. Measurement 92:208–217

Xia TB et al (2015) Operating load based real-time rolling grey forecasting for machine health prognosis in dynamic maintenance schedule. J Intell Manuf 26:269–280

Verl A et al (2009) Sensorless automated condition monitoring for the control of the predictive maintenance of machine tools. CIRP Ann 58:375–378

Kannatey-Asibu E, Yum J, Kim TH (2017) Monitoring tool wear using classifier fusion. Mech Syst Signal Process 85:651–661

Lee J, Kao HA, Yang SH (2014) Service innovation and smart analytics for industry 4.0 and big data environment. Procedia CIRP 16:3–8

Jia XD et al (2016) Wind turbine performance degradation assessment based on a novel similarity metric for machine performance curves. Renew Energy 99:1191–1201

Rmili W et al (2016) An automatic system based on vibratory analysis for cutting tool wear monitoring. Measurement 77:117–123

Butdee S, Kullawong T (2015) Life prediction of a spindle CNC machining centre using natural frequency method of vibration. Ind Eng Manag 4

Tian ZG (2012) An artificial neural network method for remaining useful life prediction of equipment subject to condition monitoring. J Intell Manuf 23:227–237

Wojciechowski S, Wiackiewicz M, Krolczyk GM (2018) Study on metrological relations between instant tool displacements and surface roughness during precise ball end milling. Measurement 129:686–694

Drouillet C et al (2016) Tool life predictions in milling using spindle power with the neural network technique. J Manuf Process 22:161–168

Twardowski P et al (2015) Investigation of wear and tool life of coated carbide and cubic boron nitride cutting tools in high speed milling. Adv Mech Eng 7:1–9

He D, Li R, Bechhoefer E (2012) Stochastic modeling of damage physics for mechanical component prognostics using condition indicators. J Intell Manuf 23:221–226

Wu QH, Ding KQ, Huang BQ (2018) Approach for fault prognosis using recurrent neural network. J Intell Manuf

Zhang Q et al (2015) Remaining useful life estimation for mechanical systems based on similarity of phase space trajectory. Expert Syst Appl 42:2353–2360

Chiu HW, Lee CH (2017) Prediction of machining accuracy and surface quality for CNC machine tools using data driven approach. Adv Eng Softw 114:246–257

Zhang JL et al (2012) Research on tool wear detection based on machine vision in end milling process. Prod Eng 6:431–437

Montgomery N, Banjevic D, Jardine AKS (2012) Minor maintenance actions and their impact on diagnostic and prognostic CBM models. J Intell Manuf 23:303–311

Wang GF, Cui YH (2013) On line tool wear monitoring based on auto associative neural network. J Intell Manuf 24:1085–1094

Rizal, M., et al. 2014 A Review of sensor system and application in milling process for tool condition monitoring., Res J Appl Sci Eng Technol, Vol. 7, pp. 2083–2097

Dutta S, Pal SK, Sen R (2016) On-machine tool prediction of flank wear from machined surface images using texture analyses and support vector regression. Precis Eng 43:34–42

Zhong ZW, Zhou J, Win YN (2013) Correlation analysis of cutting force and acoustic emission signals for tool condition monitoring. In: 2013 9th Asian Control Conference (ASCC)

Kilundu B, Dehombreux P, Chiementin X (2011) Tool wear monitoring by machine learning techniques and singular spectrum analysis. Mech Syst Signal Process 25:400–415

Szydłowski M et al (2016) Machine vision micro milling tool wear inspection by image reconstruction and light reflectance. Precis Eng 44:236

Liu C, Wang GF, Li ZM (2015) Incremental learning for online tool condition monitoring using Ellipsoid ARTMAP network model. Appl Soft Comput 35:186–198

Zhang JL et al (2017) Particle learning in online tool wear diagnosis and prognosis. J Manuf Process 28:457–463

Dutta S et al (2013) Correlation study of tool flank wear with machined surface texture in end milling. Measurement 46:4249–4260

Wang C, Gan M, Zhu CA (2017) Intelligent fault diagnosis of rolling element bearings using sparse wavelet energy based on overcomplete DWT and basis pursuit. J Intell Manuf 28:1377–1391

Lee WJ, Mendis GP, Triebe MJ et al (2019) Monitoring of a machining process using kernel principal component analysis and kernel density estimation. J Intell Manuf. https://doi.org/10.1007/s10845-019-01504-w

Mason RJ, Mostafizur Rahman M, Maw TMM (2017) Analysis of the manufacturing signature using data mining. Precis Eng 47:292–302

Mosallam A, Medjaher K, Zerhouni N (2016) Data-driven prognostic method based on Bayesian approaches for direct remaining useful life prediction. J Intell Manuf 27:1037–1048

Zhao R, Wang D, Yan D, Mao K, Shen F, Wang J (2018) Machine Health Monitoring Using Local Feature-Based Gated Recurrent Unit Networks. IEEE Trans Ind Electron 65(2):1539–1548

Barreiro J et al (2017) TCM system in contour milling of very thick-very large steel plates based on vibration and AE signals. J Mater Process Technol 246:144–157

Aghazadeh F, Tahan A, Thomas M (2018) Tool condition monitoring using spectral subtraction and convolutional neural networks in milling process. Int J Adv Manuf Technol 98:3217–3227

Li XL, Tso SK, Wang J (2000) Real-time tool condition monitoring using wavelet transforms and fuzzy techniques. IEEE Trans Syst Man Cybern Part C Appl Rev 30:352–357

Zhu KP, Wong YS, Hong GS (2009) Multi-category micro-milling tool wear monitoring with continuous hidden Markov models. Mech Syst Signal Process 23:547–560

Wu CX et al (2017) A novel approach to wavelet selection and tree kernel construction for diagnosis of rolling element bearing fault. J Intell Manuf 28:1847–1858

Lamraoui M, Thomas M, El Badaoui M (2014) Cyclostationarity approach for monitoring chatter and tool wear in high speed milling. Mech Syst Signal Process 44:177–198

Repo J (2010) Condition monitoring of machine tools and machining processes using internal sensor signals (licentiate dissertation). KTH Royal Institute of Technology, Stockholm

Ren LK, Lv WM, Jiang SW (2018) Machine prognostics based on sparse representation model. J Intell Manuf 29:277–285

Ragab A et al (2019) Prognostics of multiple failure modes in rotating machinery using a pattern-based classifier and cumulative incidence functions. J Intell Manuf 30:255–274

Yang JL, Chen JC (2001) A systematic approach for identifying optimum surface roughness performance in end-milling operations. J Ind Technol 17(2):8

Zhao R et al (2017) Learning to Monitor Machine Health with Convolutional Bi-Directional LSTM Networks. Sensors 17:1–18

Caesarendra W, Widodo A, Yang BS (2011) Combination of probability approach and support vector machine towards machine health prognostics. Probabilistic Eng Mech 26:165–173

Cai W, Zhang W, Hu X et al (2020) A hybrid information model based on long short-term memory network for tool condition monitoring. J Intell Manuf. https://doi.org/10.1007/s10845-019-01526-4

Purushothaman S (2010) Tool wear monitoring using artificial neural network based on extended Kalman filter weight updation with transformed input patterns. J Intell Manuf 21:717–730

ISO (1989) ISO 8688: Tool life testing in milling — Part 2: End milling. Geneva, Switzerland

Keskar NS (2017) On Large-Batch Training for Deep Learning: Generalization Gap and Sharp Minima. Palais des Congrès Neptune, Toulon, France : s.n.. 5th International Conference on Learning Representations. pp. 1–16

Yu G et al (2006) Feature signature prediction of a boring process using neural network modeling with confidence bounds. Int J Adv Manuf Technol 30:614–621

Bhuiyan MSH, Choudhury IA, Nukman Y (2012) An innovative approach to monitor the chip formation effect on tool state using acoustic emission in turning. Int J Mach Tools Manuf 58:19–28

Chen HJ (2011) Investigation of the methods for tool wear on-line monitoring during the cutting process. In: Li D, Liu Y, Chen YY (eds) Computer and Computing Technologies in Agriculture IV.CCTA 2010. IFIP Advances in Information and Communication Technology. s.l, vol 347. Springer, Berlin

Ritou M et al (2014) Angular approach combined to mechanical model for tool breakage detection by eddy current sensors. Mech Syst Signal Process 44:211–220

Yang ZQ et al (2017) Monitoring method of high-speed tool wear level based on machine vision. Int J Signal Process, Image Processing and Pattern Recognition 10(6):16

Silva RG (2010) Condition monitoring of the cutting process using a self-organizing spiking neural network map. J Intell Manuf 21:823–829

Javed K, Gouriveau R, Zerhouni N, Zemouri R, Li X (2012) Robust, reliable and applicable tool wear monitoring and prognostic: approach based on an improved-extreme learning machine, 2012 IEEE Conference on Prognostics and Health Management, Denver, CO, pp. 1–9

Zhou YQ, Xue W (2018) Review of tool condition monitoring methods in milling processes. Int J Adv Manuf Technol 96:2509–2523

Huang PTB, Ma CC, Kuo CH (2015) A PNN self-learning tool breakage detection system in end milling operations. Appl Soft Comput 37:114–124

Lou MS, Chen JC, Li CM (1998) Surface Roughness Prediction Technique for CNC End-Milling. J Ind Technol 15:1–6

Srinivasa Prasad B et al (2013) Condition Monitoring of CNC Machining Using Adaptive Control. Int J Autom Comput 10:202–209

Mecheri K, et al. (2008) Cutting tool wear monitoring using wavelet (DWT) analysis of vibratory signal of an horizontal high speed milling center. Monastir, Tunisie : s.n.. 6° Journées Scientifique et Technique en Mécanique et Matériaux

Li LH, An QB (2016) An in-depth study of tool wear monitoring technique based on image segmentation and texture analysis. Measurement 79:44–52

Wang GF, Yang YW, Guo ZW (2013) Hybrid learning based Gaussian ARTMAP network for tool condition monitoring using selected force harmonic features. Sensors Actuators A Phys 203:394–404

Javed K, Gouriveau R, Zerhouni N (2015) A new multivariate approach for prognostics based on extreme learning machine and fuzzy clustering. IEEE Trans Cybern 45:2626–2639

Zhu L et al (2010) Improving the accuracy of predicting disulfide connectivity by feature selection. J Comput Chem 31

Liu CQ et al (2018) A sensor fusion and support vector machine based approach for recognition of complex machining conditions. J Intell Manuf 29:1739–1752

Wang GF et al (2019) A new tool wear monitoring method based on multi-scale PCA. J Intell Manuf 30:113–122

Orth P, Yacout S, Adjengue L (2012) Accuracy and robustness of decision making techniques in condition based maintenance. J Intell Manuf 23:255–264

Attanasio A, Ceretti E, Giardini C, Cappellini C (2013) Tool Wear in Cutting Operations: Experimental Analysis and Analytical Models. ASME J Manuf Sci Eng 135(5): 051012. https://doi.org/10.1115/1.4025010

Xia TB, Xi LF (2017) Manufacturing paradigm-oriented PHM methodologies for cyber-physical systems. J Intell Manuf 30:1659