Welcome to the IKCEST

Microporous and Mesoporous Materials | Vol.313, Issue. | 2021-01-01 | Pages 110834

Microporous and Mesoporous Materials

Design and synthesis of Pt catalyst supported on ZSM-22 nanocrystals with increased accessible 10-MR pore mouths and acidic sites for long-chain n-alkane hydroisomerization

Qun Chen   Lei Zhang   Wenqian Fu   Tiandi Tang   Guoren Cai   Liwen He  
Abstract

Synthesis of ZSM-22 with more accessible 10-membered ring (10-MR) openings is important for the preparation of highly active and selective hydroisomerization catalyst. Herein, we synthesized ZSM-22 nanocrystals (HZSM-22-NA) with more 10-MR openings and a mesoporous structure on a large scale. The prepared Pt/HZSM-22-NA catalyst (4.74 × 10−6 mol·g−1·s−1) exhibited higher intrinsic activity than conventional HZSM-22-supported Pt catalyst (Pt/HZSM-22, 2.65 × 10-6 mol·g−1·s−1) in the hydroisomerization of n-dodecane. Additionally, Pt/HZSM-22-NA had higher C12 isomer selectivity (93.5%) and lower cracking selectivity (6.5%) than Pt/HZSM-22 (79.8% and 20.2%) at the same n-dodecane conversion level (~90%). These features could be due to the change in the porous structure and acidity between HZSM-22-NA and HZSM-22. HZSM-22-NA composed of nanocrystals at c-axis could double the number of accessible 10-MR openings and acidic sites, thus enhancing the isomerization activity of Pt/HZSM-22-NA. Furthermore, the mesoporosity of HZSM-22-NA facilitated mass transfer of the intermediates and products, thus inhibiting cracking reaction.

Original Text (This is the original text for your reference.)

Design and synthesis of Pt catalyst supported on ZSM-22 nanocrystals with increased accessible 10-MR pore mouths and acidic sites for long-chain n-alkane hydroisomerization

Synthesis of ZSM-22 with more accessible 10-membered ring (10-MR) openings is important for the preparation of highly active and selective hydroisomerization catalyst. Herein, we synthesized ZSM-22 nanocrystals (HZSM-22-NA) with more 10-MR openings and a mesoporous structure on a large scale. The prepared Pt/HZSM-22-NA catalyst (4.74 × 10−6 mol·g−1·s−1) exhibited higher intrinsic activity than conventional HZSM-22-supported Pt catalyst (Pt/HZSM-22, 2.65 × 10-6 mol·g−1·s−1) in the hydroisomerization of n-dodecane. Additionally, Pt/HZSM-22-NA had higher C12 isomer selectivity (93.5%) and lower cracking selectivity (6.5%) than Pt/HZSM-22 (79.8% and 20.2%) at the same n-dodecane conversion level (~90%). These features could be due to the change in the porous structure and acidity between HZSM-22-NA and HZSM-22. HZSM-22-NA composed of nanocrystals at c-axis could double the number of accessible 10-MR openings and acidic sites, thus enhancing the isomerization activity of Pt/HZSM-22-NA. Furthermore, the mesoporosity of HZSM-22-NA facilitated mass transfer of the intermediates and products, thus inhibiting cracking reaction.

+More

Keywords

NA

Cite this article
APA

APA

MLA

Chicago

Qun Chen,Lei Zhang, Wenqian Fu, Tiandi Tang, Guoren Cai, Liwen He,.Design and synthesis of Pt catalyst supported on ZSM-22 nanocrystals with increased accessible 10-MR pore mouths and acidic sites for long-chain n-alkane hydroisomerization. 313 (),110834.

Disclaimer: The translated content is provided by third-party translation service providers, and IKCEST shall not assume any responsibility for the accuracy and legality of the content.
Translate engine
Article's language
English
中文
Pусск
Français
Español
العربية
Português
Kikongo
Dutch
kiswahili
هَوُسَ
IsiZulu
Action
Recommended articles

Report

Select your report category*



Reason*



By pressing send, your feedback will be used to improve IKCEST. Your privacy will be protected.

Submit
Cancel